---
title: "Yealink: Manual Configuration"
description: "# Obtain SIP Credentials 1. Using any web browser log in to the Manager Portal 2.  Click on **Users** at the top![> Find your extension number. At the far right click on the pencil, and then Phones Click on Account at the top Click…"
url: "https://snap-dial.com/docs/yealink-manual-configuration/"
updated: "2025-12-30"
category: Voice Solutions
---

# Yealink: Manual Configuration

# Obtain SIP Credentials

1. Using any web browser log in to the Manager Portal
2.  Click on **Users** at the top![></li>
   <li>Find your extension number. At the far right click on the <strong>pencil</strong>, and then <strong>Phones</strong><img src=](https://cdn.elev.io/file/uploads/84W5jLN4jaoQTh6QeQFmWmnnVrfbJAc4c15mIvLNNtI/xl3_JVvaLAEkO5EOuAnnlStnnhyP0nF1Zh65oW7qPbI/1595635162076-hSg.png)Find Yealink Phone IP Address
   1. From the Yealink phone select **Menu**
   2. Select **Status**
   3. Select **Network**
   4. Select** IPv4 Status**
   5. Take note of the IP address for the next steps

   # Configure Yealink Phone

   1. Using any web browser navigate to the IP address from the above step
   2. Log in. The default credentials are admin / admin![></li>
      <li>Click on Account at the top<img src=](https://cdn.elev.io/file/uploads/84W5jLN4jaoQTh6QeQFmWmnnVrfbJAc4c15mIvLNNtI/LwOSE1Z9NdjPKfKVnJBWI_pW3MD-pnkUuylUP5_Enqs/1595635577866-e_U.png)
   3. **Line Active**: Set to Enabled
   4. **Label**: Can be any descriptive name. Usually it's the extension number. This will show on the phone's LCD.
   5. **Display Name**: Can be any descriptive name. Will not show anywhere.
   6. **Register Name**: Username from PBX Portal
   7. **User Name**: Username from PBX Portal
   8. **Password**: Password from PBX Portal
   9. **Enable Outbound Proxy Server**: Enabled
   10. **Outbound Proxy Server: **sbc.ucaasnetwork.com:0
   11. **Transport**: UDP
   12. **SIP Server 1**
       - **Server Host**: Domain/Proxy from PBX Portal
3. Click **Confirm**
4. The page will refresh. Look at the top under **Register Status**. It should now say **Registered**![></li>
   </ol>
   <h1 class=](https://cdn.elev.io/file/uploads/84W5jLN4jaoQTh6QeQFmWmnnVrfbJAc4c15mIvLNNtI/KS5E_vla8Jdl5agXuSimD02qIimrKeyL5cHJdK_2e5s/1595635663954-cS8.png)Configure Additional Settings
   1. Click on **Account** at the top![></li>
      <li>Click on <strong>Advanced </strong>on the left<img src=](https://cdn.elev.io/file/uploads/84W5jLN4jaoQTh6QeQFmWmnnVrfbJAc4c15mIvLNNtI/34oinyAseHW7M3J0AFLaQzHPKVtIgshb4FQ8qaVay9o/1595635674729-cgA.png)
   2. **Subscribe for MWI**: Enabled
   3. **Subscribe MWI to Voice Mail**: Enabled
   4. **Voice Mail**: 5001
   5. Click **Confirm**![></li>
      </ul>
      </li>
      <li>Click on <strong>Features</strong> at the top<img src=](https://cdn.elev.io/file/uploads/84W5jLN4jaoQTh6QeQFmWmnnVrfbJAc4c15mIvLNNtI/BFLMMUO56izS9AEVXM1sqgiPrtNK7qvIgXY_tIUzRHo/1595635687178-ziw.png)