(888) 881-7495
View Categories

Yealink: Manual Configuration

< 1 min read

Obtain SIP Credentials #

  1. Using any web browser log in to the Manager Portal
  2.  Click on Users at the top></li> <li>Find your extension number. At the far right click on the <strong>pencil</strong>, and then <strong>Phones</strong><img decoding=Find Yealink Phone IP Address #
    1. From the Yealink phone select Menu
    2. Select Status
    3. Select Network
    4. Select IPv4 Status
    5. Take note of the IP address for the next steps

    Configure Yealink Phone #

    1. Using any web browser navigate to the IP address from the above step
    2. Log in. The default credentials are admin / admin></li> <li>Click on Account at the top<img decoding=
    3. Line Active: Set to Enabled
    4. Label: Can be any descriptive name. Usually it’s the extension number. This will show on the phone’s LCD.
    5. Display Name: Can be any descriptive name. Will not show anywhere.
    6. Register Name: Username from PBX Portal
    7. User Name: Username from PBX Portal
    8. Password: Password from PBX Portal
    9. Enable Outbound Proxy Server: Enabled
    10. Outbound Proxy Server: sbc.ucaasnetwork.com:0
    11. Transport: UDP
    12. SIP Server 1
      • Server Host: Domain/Proxy from PBX Portal
    13. Click Confirm
    14. The page will refresh. Look at the top under Register Status. It should now say Registered></li> </ol> <h1 class=Configure Additional Settings #
      1. Click on Account at the top></li> <li>Click on <strong>Advanced </strong>on the left<img decoding=
      2. Subscribe for MWI: Enabled
      3. Subscribe MWI to Voice Mail: Enabled
      4. Voice Mail: 5001
      5. Click Confirm></li> </ul> </li> <li>Click on <strong>Features</strong> at the top<img decoding=
        Updated on December 30, 2025

What are your Feelings

  • Happy
  • Normal
  • Sad

Powered by BetterDocs